← Back to the game

Minesweeper patterns

In short
  • A pattern is a group of numbers along a wall of covered cells that always resolves the same way.
  • They all rest on one idea: if one number's possible mines are a subset of another's, compare the two and subtract.
  • Learn them once and you stop "thinking" about half the moves on a board: you just see them.

Good Minesweeper players don't solve every number from scratch. They recognise shapes. The same few configurations come up on every board, at every level, and each of them has a known answer. This guide shows the essential ones on real positions, explains why each one works (so you can rebuild it when you forget it), and ends with a practice position.

All the figures below follow the same conventions: a solid border is the edge of the board; a dashed border means the board continues beyond the picture, with cells you know nothing about. Letters mark covered cells we are talking about.

The idea behind every pattern: subsets

Take two neighbouring numbers. Each one says "there are exactly N mines among these covered cells". When the covered cells of the first number are all also covered cells of the second, the first number's mines are part of the second number's count. Subtract them, and what's left tells you about the cells only the second number can see:

That's it. Every pattern below is this rule applied to a common shape.

1-1: the safe cell at the end

A row of 1s along the top wall, starting in the corner.

The 1 in the corner has only two covered neighbours, A and B: one of them is a mine. The next 1 sees A, B and C. Its single mine is the one already in A or B, so C is safe.

See it on the board

safe

Notice what you don't know: whether the mine is in A or in B. Open C first; its number usually settles the question.

The wall matters. The corner 1 only sees two covered cells because the edge of the board cuts off the rest. A wall can also be made of cells that are already open: any straight run of revealed cells works the same way.

1-2: the mine at the end

Same corner, but the second number is a 2.

The corner 1 again puts exactly one mine in A or B. The 2 sees A, B and C and needs two mines. A and B can only supply one, so the second one must be in C, which is a mine.

See it on the board

mine

1-1 gives a safe cell, 1-2 gives a mine. Same reasoning, opposite result: the difference between the two numbers (1) equals the number of extra cells (1).

1-2-1: two mines, three safe cells

The most famous pattern. Three numbers 1, 2, 1 in a row along a flat wall of covered cells.

The 1-2-1 is in the middle: the 1 above B, the 2 above C, the 1 above D.

Why it works: the 2 needs two mines among B, C and D. Suppose C were a mine. Then the 1 above B would already have its mine in C, so B would be safe; same on the other side, D would be safe. The 2 would then have only one mine. Contradiction. So C is safe, and the 2's two mines are B and D. Each 1 is now full, which makes A and E safe too.

See it on the board

safe mine

The rule to remember: in a 1-2-1, the mines are under the 1s.

1-2-2-1: mines under the 2s

Its big brother. Four numbers 1, 2, 2, 1 along a wall.

The 1-2-2-1 sits above B, C, D and E.

Here the rule flips: the mines are under the two 2s, in C and D, and everything else is safe. Why? Suppose C were safe. The first 2 (above C) sees B, C and D, so it would need mines in both B and D. The second 2 (above D) sees C, D and E; with C safe and D a mine, it would also need E. But then the 1 above E would touch two mines, D and E. That's impossible, so C is a mine. The same argument from the other side shows D is a mine. Each 1 is then full: the left one with C, the right one with D, so A, B, E and F are all safe.

See it on the board

safe mine

Two rules side by side are easy to mix up, so here's a way to remember them: 1-2-1, mines under the 1s; 1-2-2-1, mines under the 2s.

Reduction: subtract the flags first

Patterns rarely appear in a clean form in the middle of a game. Usually some neighbouring mines are already flagged, and the numbers look "too big" to match anything you know. The fix is simple: subtract the flags a number already touches, then look again.

Nothing here looks like a pattern, until you subtract the flag.

The second 2 touches the flag, A and B. One of its two mines is the flag, so for the covered cells it's really a 1: one mine in A or B. The 1 next to it sees A, B and C. That's a 1-1: C is safe.

See it on the board

safe

Get into the habit of reading every number as "its value minus the flags around it". A 3 with two flags is a 1, a 4 with three flags is a 1. Reduced numbers reveal the patterns hidden all over a busy board.

Patterns in every direction

The figures above all sit on a top wall, but a pattern doesn't care about orientation. A 1-2-1 can run down a column, along the bottom of the open area or against the right edge of the board. When scanning a board, look for any straight line of numbers with a straight line of covered cells beside it, then read the numbers in order.

Walls also don't have to be the edge of the board. Any cells that are already open act as a wall, because they can't hide mines. That's why patterns turn up constantly along the border of a big opening.

Practice position

Which of the four covered cells are mines, and which are safe? Work it out before opening the answer: every one of them can be decided.

Hint

Start with the corner: you have seen this 1-2 already. Then let the new information flow to the right.

Answer

safe mine

  1. The corner 1 and the 2 form a 1-2: C is a mine.
  2. The 1 above C sees B, C and D. Its mine is C, so B and D are safe.
  3. Back to the corner 1: it sees A and B, and B is safe, so A is a mine.

That chain, one pattern unlocking a second deduction that unlocks a third, is how most of a real board gets solved.

Practise where it counts

Patterns stick through repetition. Play a few Intermediate boards and say the pattern out loud before each click: "1-1, safe", "1-2, mine". After a while you'll stop naming them and simply see them. Then take on the Expert board, where the density of mines makes these shapes appear everywhere.

Minesweeper patterns: FAQ

More Minesweeper guides